Att 2230 Uživatelský manuál

2.4 GHz Dual HandsetCordless Telephone 2230 with Caller ID/Call WaitingPlease also readPart 1 — Important Product InformationUSER’S MANUAL Part 2AT&am

Language SettingYou can set each handset so the display appears in English or Spanish. Thedefault setting is ENGLISH.1 Press S.2 Press < until the

Set Dial ModeNOTE: When you change the dial mode setting, BOTH handsets areaffected.This phone comes set for touch tone (DTMF) dialing. If you have d

10TELEPHONE OPERATIONMaking a Call1 Press P,thendial the number— OR —Dial the number,then press P.2 Press P againto end the call.Answering a Call1 Pre

11Temporary Tone DialingIf you have dial pulse (rotary) service,you can change from dial pulse totouch tone dialing during a call.1 Make the call,and

Conference Calling1 If one handset is already on a call,you can connect the secondhandset to the call by pressing P.2 Disconnect either or both hands

This telephone can store up to 20 telephone numbers and names. Storinga number and name in one handset automatically stores it in both.Storing a Numbe

Dialing a Number in Phone Book1 Press m.2 Enter the first letter of the stored name,then scroll using < or >— OR —Press < or > to scroll t

HEADLINE RIGHTHEADLINE R-SUB15NOTE: Caller ID information is stored in both handsets. Removing acall record from one handset also removes it from the

Storing a Call Record in Phone BookYou can store a number received by Caller ID in the telephone phone book.1 Press S twice. The screen displays the m

17BATTERIESBattery LifeBattery life depends on how far the handset is from the base,and otherenvironmental conditions.NOTE: For optimum performance,

CONTENTSBEFORE YOU BEGIN...1About the Base and the Charger..1About Caller Identification (Caller ID)...1A

18Replace the Handset Battery Pack1 Install the handset battery.Use only AT&T Battery 2422,SKU# 23402.2 Charge the handset battery.• Place the han

If you have difficulty operating this phone,try the suggestions below.For Customer Service,visit our website at www.telephones.att.com or call 1 800 2

If you hear noise or interference when using the phone:• You may be out of range. Move closer to the base.• Household appliances plugged into the same

© 2001 Advanced American Telephones. All rights reserved.Printed in China. Issue 1AT&T 07/01

About the Base and the ChargerThis cordless product provides you with two cordless handsets,a basestation and a spare charger. You can charge either h

Base InstallationNOTE: Install the base unit and spare handset charger away fromelectronic equipment, such as personal computers, television sets orm

INSTALLATION34 Charge the handset battery.• Place the handset in the base (or the spare charger).• Charge the battery at least 12 hours. After the fir

Feature Setup MenuNOTE: When you follow the directions to “Clear Message Waiting”or “Set Dial Mode”you change settings for BOTH handsets. All otherfea

Ring VolumeAdjust the volume of the handset ringer. Setting volume to 0 turns theringer off. Default setting is 6.1 Press S.2 Press < until the scr

Auto AnswerWhen this feature is on,an incoming call is connected when you lift thehandset from the base or the charger (you don’t have to press P). If

Key LockWhen this feature is on,the keypad cannot be used to dial calls. You canstill answer calls,but when the call is ended,the keypad lock is react